The technical requirements of furniture painting room for spray painting room

Furniture paint room for furniture producers to bring a lot of convenience, save a lot of time, then we know furniture paint room for the technical requirements of the spray room, it is better to come
Take a look below:
(1) The air entering the furniture painting room must be strictly filtered to ensure that there is no dust in the air.
(2) Ensure that the air in the spray booth is converted twice per minute, so the indoor air flow rate should be 0.3-0.6/5. Excessive air flow rate, excessive paint loss, coating state
Poor air flow rate is too small, affecting the normal volatilization of solvents.
(3) Furniture painting room to ensure that there is no negative pressure in the spray room. It can be achieved by controlling the intake and exhaust volume, and the amount of air entering the spray booth should be slightly more than the exhaust volume.
(4) The air flow in the painting room must flow from the ceiling to the ground along the direction of gravity, and the air is discharged from the ground and filtered into cleaner air
(5) The operating noise of the painting room is not allowed to exceed 85dB.
(6) Furniture painting room painting room has good lighting conditions.